Description
Swivelling IR motion detector for outside use with 2 sensors
The two infrared sensors of this motion detector detect movements of persons, large animals and vehicles within a detection range of up to 3m at a detection angle of 360° (on free surface) and up to 12m at a detection angle of 180° and switch on the connected lighting. Thanks to the two sensors, the motion detector detects movements in front of, behind and under the motion detector.
Programmable
Switch-on time: After an adjustable time of approx. 10 seconds to 15 minutes, the motion detector switches the lighting off again if no more movement is detected.
Ambient brightness: A controller can be used to regulate the switch-on sensitivity of this device depending on the ambient brightness (in the range between 3 and 2,000 LUX).
Swivelling: The detection area can be adjusted in a targeted manner by swivelling vertically and horizontally.
Where can I use the motion detector?
This surface-mounted motion detector is best suited for wall mounting outdoors, thanks to its IP44 protection rating.
Product features
Operating voltage: 220-240V AC 50Hz
Max. Power consumption: max. 1200W with usual lamps, max. 600W with LED and energy saving lamps
Power consumption on standby: 0,5W
Detection speed: 0,6-1,5m/s
Detection range: Max. 12m (<24°C)/180°; Max. 3m (<24°C)/360°
Ambient brightness: 3-2.000LUX
Protection: IP44
Switch-off delay: Min. 10s +/-3s - Max. 15min +/-2min
Ambient temperature: -20° to +40°C
Humidity: <93%
Swiveling: 40° vertical, 100° horizontal
Dimensions: 79x55,5x67,5mm
Housing material: Plastic
Color: White
In scope of delivery:
1 x SEBSON IR motion detector
