Description
Application: The engine treatment is conducted in three stages:Stage 1: Warm up the engine to the normal working temperature, then turn engine off. Ensure the syringe is at room temperature so the contents flow freely. Empty the contents of the syringe into the engine oil reservoir. Start the engine and let it idle for 5-10 mine 2: Repeat the procedure after 60-150 miles of rune 3: Repeat the procedure after 60-150 miles of run. The treatment is considered complete after 950 milesge: Oil system capacity, l : Number of syringes (8 ml), pcs. 3-10 : 3 11-20 : 6 21-30 : 9Note: Changing oil is NOT recommended until the treatment is fully completed. It is possible to conduct the treatment at idle: 4 hours of idling is an equivalent to 200 km (approx. 125 miles) of run. New engines with odometer readings up to 12,000 miles should be treated in one stage. Engines that have undergone a complete overhaul should be treated in the usual three-stage manner. The protective metal-ceramic coating will form on any operative mechanical parts; however, if an engine part being treated is in critical condition (100% wear), the worn part should be replaced.