Description
TCT Core Drill Bit of TIMESETLTIMESETL SDS-Plus Masonry Core Bit – High Quality●Made of hardened metal, high grade tungsten carbide tipped, durable for long term useTIMESETL SDS+ Drill Bit – Easy To Use●These dry TCT core bits are to be used obviously dry and with high speed and low pressure. Low pressure is essential to prolong the life of the cutting tips and get a clean straight cut.●Attach the bit to you drill and place the pilot drill in the centre of where you want to drill. Start slowly so the pilot drill can get a firm grip and keep dead centre. Once the core bit has cut into cutting surface to 1/8 inch, remove it from the hole. Then remove the pilot drill as this has now done its job.●Then place the core bit into the hole and using high speed and low pressure will make very light work of cutting the hole.●When drilling, keep moving the bit in and out in the hole. Moving the core bit in and out of the hole is essential for removing the cuttingsSETL TCT Core Drill Bit with SDS Shank – Wide Usage●This Hollow Core Drill Is Ideally Suited For Plumbers, Heating And Ventilating Engineers, Electricians, Kitchen Fitters and General Builders.●Great for cutting fast clean holes in, concrete, aerated block. light to medium density bricks, blocks and masonryification: Material: Hardened and Tempered SteelTip: High grade tungsten carbideColor: silver grayLength: 110mmDiameter: 68mmStrength: 825gDelivery1 x Rotary Hammer Core Bit with Pilot Drill + Arbour