Description
Part of the G&H Trimline range which is larger than a regular plate and features a raised square centre. The plate is made from brass and then air dry lacquered (the process used for antique finishes means that the colour of the finish can vary slightly from switch to switch). Technical details: Rocker Light Switches 10Amp: 95mm x 95mm (1 gang, 2 gang, 3 gang). 155mm x 95mm (4 gang). Use as 1 or 2 way (1 gang intermediate also available). Required depth: 25mm or deeper. Toggle Light Switches 10Amp: 95mm x 95mm (1 gang, 2 gang). 155mm x 95mm (3 gang, 4 gang). Use as 1 or 2 way (1 gang intermediate also available). Required depth: 25mm or deeper. Single & Double Plug Sockets: 95mm x 95mm (single). 155mm x 95mm (double). Required depth: 25mm or deeper (recommend 35mm unless box is sunk into wall). Rated Amps: 13A DP. USB Chargers: 1 side 1A & 1 side 2.1A. Dimmer Switches: Push on/off and turn to dim. 95mm x 95mm (1 gang, 2 gang). 155mm x 95mm (3 gang, 4 gang). Required depth: 35mm or deeper. 400W: 40w minimum load, 400w maximum load. Halogen Only. 700W: 150w minimum load, 700w maximum load. Halogen Only. LED: 1 to 10 LED bulbs (max 120W). 300W max load if used with halogen bulbs. Use as 1 or 2 way (2 way only with an on/off switch). 20 Amp Switches: 95mm x 95mm. Required depth: 25mm or deeper. Rated Amps: 20A DP (Double Pole). 45 Amp DP Switches: 95mm x 95mm (single). 155mm x 95mm (double with 13A socket). Required depth: 35mm or deeper. Shaver Sockets: 155mm x 95mm. Required depth: 47mm. Rated Voltage: 115V~240V AC2. 5 Amp Sockets: 95mm x 95mm. Required depth: 25mm or deeper. Data & Fan Isolator Sockets: 95mm x 95mm. Required depth: 25mm or deeper. Euro Plates: 95mm x 95mm (single). 155mm x 95mm (double). These are empty designed for modular inserts to clip in. Blank Plates: 95mm x 95mm (single). 155mm x 95mm (double). Required depth: 16mm or deeper.