U.S. Solid 1" Brass Electric Solenoid Valve 24V AC Normally Closed VITON Water Air Oil
U.S. Solid 1" Brass Electric Solenoid Valve 24V AC Normally Closed VITON Water Air Oil - Image 2

U.S. Solid 1″ Brass Electric Solenoid Valve 24V AC Normally Closed VITON Water Air Oil

$192.99

  • 1″ G Thread, Solid brass body, 24V AC
  • The solenoid with directly move the plunger and close the orifice for any fluid or gas flow. Only open while energized.
  • Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.
  • The arrow indicates the flow direction (horizontal mounting please).
  • VITON GASKET- Viton is space age material that is very chemically inert. As such it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident).

In stock

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Description

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, 1″ female threaded (G) connections, and strong VITON gasket.
The solenoid valves have a rating of IP65, which means they can withstand spray from water. However, if permanently installed outdoors, it is recommended that you enclose the valves in some protective housing; not for use underwater. Suitable for use with hot or cold water, natural gas, air, very low viscosity fluids (
Brand: U.S. Solid
Model: USS2-00063
Size: 1″
Flow Aperture: 25 mm
Body Material: Brass
Gasket / Diaphragm / Seal: VITON
Rated voltage: AC 24V, ± 10%
Current: 0.875 A
Power rating: 21 VA
Operation Type: Semi-direct Lift Valve
Operation Mode: Normally Closed
Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)
Flow capacity: 12 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow value: 12 Cv
Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)
Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)
Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc.
Quality assurance: CE Certified
OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 80℃. It is fully complied with national standard: JB/T7352-2010.
Warning: Lead content ~ 2.82%. It cannot be applied to drinking water.

Additional information

Weight 0.975 kg
brand

U.S.SOLID
dimensions

‎13.72 x 10.16 x 8.64 cm; 975 Grams
SKU: B00DQ1QUAO Category: Tags: , ,