TILTA WLC-T04 Nucleus-Nano Nucleus N Wireless Lens Control System Follow focus compatible Crane 1 2 Plus Ronin S TILTA camera Cage DSLR
TILTA WLC-T04 Nucleus-Nano Nucleus N Wireless Lens Control System Follow focus compatible Crane 1 2 Plus Ronin S TILTA camera Cage DSLR - Image 2
TILTA WLC-T04 Nucleus-Nano Nucleus N Wireless Lens Control System Follow focus compatible Crane 1 2 Plus Ronin S TILTA camera Cage DSLR - Image 3
TILTA WLC-T04 Nucleus-Nano Nucleus N Wireless Lens Control System Follow focus compatible Crane 1 2 Plus Ronin S TILTA camera Cage DSLR - Image 4
TILTA WLC-T04 Nucleus-Nano Nucleus N Wireless Lens Control System Follow focus compatible Crane 1 2 Plus Ronin S TILTA camera Cage DSLR - Image 5

TILTA WLC-T04 Nucleus-Nano Nucleus N Wireless Lens Control System Follow focus compatible Crane 1 2 Plus Ronin S TILTA camera Cage DSLR

$0.00

  • Make sure this fits by entering your model number.
  • WLC-T04 motor could not work with any Sigma lens and film lens. The WLC-T04 motor can not powe those big lens with large damping. The hand wheel need to be installed at least 30cm from the moter. If install them too close, it could not work. We suggest customer use 8V or 14.2V output to power the motor. The handwheel can only be powered by the battery. The handwheel could not connect any external power. If connect any external power, it will burn the handwheel.
  • The Nano Hand Wheel Controller has a compact knob design similar to professional follow focus hand units (the design is very similar to the Tilta Nucleus-M hand unit’s focus wheel). The Nano Hand Wheel Controller has no delay. It is highly responsive, wireless, and accurate. It is powered via a single 14500 rechargeable battery (which is included in the kit) and yields a 6 hour operating time.
  • The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions. The motor need to connect to power supply to work. Customer can purchase the power supply Tilta design for this motor.
  • The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the Nano Motor and Nano Hand Wheel Controller to the same channel and you will have full control. The wireless range of both the Nano Hand Wheel Controller and Nano Motor is 300 feet!
  • The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65N·m and at 14.8V is 1N·m.

Out of stock

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Description

Weight: Nano Hand Wheel Controller (no batteries): 0.351 lbs Nano Motor: 0.168 lbs 15mm Lightweight Rod Mounting Frame Baseplate with 15mm x 100mm Rod: 0.172 lbs Hand Wheel Controller Adapter for Tilta Gravity G2X and DJI Ronin-S: 0.046 lbs Nano Motor Dimensions: Length/Height: 8cm Width: 2.26cm (end to end furthest points) Depth: 2.38cm Nano Hand Wheel Controller Dimensions: Diameter: 7.3cm Depth: 4.13cm Color: Black Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood Packing List (1) Nucleus-Nano Hand Wheel Controller (1) Nucleus-Nano Wireless Follow Focus Motor (1) 15mm Single Rod Mounting Baseplate For 95mm Lens (2) 1/4″-20 Hex Screws (2) Rod Mount Hex Screw (1) 15mm x 100mm Black Aluminum Rod (1) 31cm 5V Micro USB male to 5V Micro USB male motor power cable (2) Photographic lens follow focus gear rings (1) Nucleus-Nano Hand Wheel Attachment Plate for Ronin-S/G2x (1) Nucleus-Nano Hand Wheel Attachment Adapter for Crane 1 (1) 14500 Dual Battery Wall Charger (2) 14500 Batteries (1) M4 Allen key (1) M6 Allen key (1) User Guide The adapter for Crane 2 is an optional accessory. Customer can order it separately if need the adapter for Crane 2 The kit also comes with a lightweight mounting frame for 15mm rods. The rod mounting frame is simple, reliable, strong, and streamlined. Simply connect the mounting frame to your camera or together with the G2X Series Manfrotto Style Camera Quick Release Baseplate with Riser to fit your needs. ** PLEASE NOTE: The R/S cables we offer for our wooden handles ARE NOT compatible with the Nucleus-Nano since the engineering and pin configurations are completely different. Using the wooden handle R/S cables are not safe to use with the Nucleus-M or Nucleus-Nano. Only use cables that have been developed by us exclusively for the Nucleus-Nano system.

Additional information

Weight 0.88 kg
brand

TILTA
dimensions
SKU: B07KYC6HK4 Category: Tags: , , ,