Description
Features:
The Switch 30A relay, higher load power and more stable performance. The receiver adopts ultra-high sensitivity to accept the module. The anti-interference ability is higher than the super-regeneration module and the ordinary super-heterodyne module on the market. The distance is greatly enhanced! The back tinned tin output current is more stable, and the isolation slot works safer and more reliable.
Specification:
Product : Single pump special controller switch
Size: 55*110*35mm
Product frequency :433MHz
Remote control distance: 0-100m or more (depending on the supported launch)
Working voltage: DC12-48V
Maximum load: 1200 watts
Load power: 10A
Working mode: jog, inter-lock, self-locking,5s/10s/15s/20s delay.
Modulation method: ASK amplitude modulation
Application area: special for water pump
Compatible control or change work model:
Press learn button 3S,till LED Red (press 1-6 times again, match 6 work model).Press Remote Controller Button till LED off.
Remove control code:
Press the learning button 8-10S,Till LED off, means code cleared .
How to change work model:
(remove last control code)
1.Momentary:Press learn button 3S,till LED Red.Press Remote Controller Button till LED off.
2.Inter-lock:Press learn button 3S,till LED Red,press learn button 1 time again .Press Remote Controller Button NO.1 and NO.2.
3.Self-lock:Press learn button 3S,till LED Red,press learn button 2 times again .Press Remote Controller Button 2s.
4.5/10/15/20 Delay off:Press learn button 3S,till LED Red,press learn button 3/4/5/6 times again.Press Remote Controller Button 2s.
Package:
2X Remote Control (Battery include)
1X 12V-48V 1Channel Pump Special Switch
1X Instrucion Manual
