Description
20 pcs undermount sink brackets, undermount sink clips kitchen sink fixing clips sink mounting kit manganese steel sink bracket and supports
This product is suitable for use with porcelain and stainless steel sinks of any size, making it an ideal choice for repairs and reinforcement.
The product is constructed from galvanised stainless steel.
Please note that this set of sink clips can be fixed in place with epoxy, liquid nails or 100% silicone.
Please note that the above adhesives are not included in the kit.
Please refer to the installation instructions below.
Please note that installing a greater number of clips will result in a more secure sink installation.
The number of clips required is typically between eight and ten.
1. The area of the sink base plate surface where the clips will be installed must be thoroughly cleaned.
2. It is recommended that a stronger and thicker putty-type epoxy, 100% silicone or liquid nail be applied to the base of the kit’s perforated spacers/bolts.
3. Firmly press the kit’s gasket/bolt into the mounting surface, ensuring that the epoxy or silicone is fully removed from the hole in the base.
4. Once the epoxy or silicone has set securely, install the sink with the bracket and wing nut.
Specification:
Product Size: 24.5*16.7*2.3cm
Product weight: 648.2g
Pack size: 24.5*16.7*2.3cm
Packing weight: 648.3g
Colour: Silver
Material: Manganese steel
Package
Inside: 20 PCS Undermount Sink Brackets
