Description
Aqualogis Antibac-Air Filter For Whirlpool refrigerators
Note: This is NOT a Water Filter but the AIR FILTER CARTRIDGE for Whirlpool fridges
Whirlpool advise that air filter should be changed every six months.
Anti bacterial air filter Anibac-Air fits following refrigerators: Whirlpool, Smeg, Caple, Bauknecht, KitchenAid, Kenmore, Sholtes, Ariston, Hotpoint
How to replace the filter:There are two types of air filter installations. Each one requires different steps, so identify the air filter type in your full-size refrigerator before getting started.
Type 1, follow these instructions:Please Note: The air filter is located behind the blue LED-lighted vent cover, located on the rear wall near the middle of the refrigerator.a. Remove the air filter from its packaging.b. Pull out plastic cover over the vented cover. We suggest removing the cover by lifting up one side of the cover, then the other.c. Snap the filter into place.
Type 2, follow these instructions:Install the air filter behind the vented door, located on the rear wall near the top of the refrigerator compartment.a. Remove the air filter from its packaging.b. Lift open the vented door.c. Snap the filter into place to reset the air filter status (only some models)After replacing the air filter, the air filter status will need to be reset. Directions for resetting the status will vary by model number, we recommend referencing the Use and Care Guide for specific models instructions.
To Reset the Air Filter:a. Press and hold the AIR FILTER button for 3 seconds.b. The filter icons will turn off. When the system is reset, the air filter icon will return to its BLUE color and the words “Replace Filter” will disappear from the control panel.
