Description
BOND IT CG PVA glue for craft applications and as a bonding agent, primer and sealer. An all purpose, high quality primer, sealer and bonding agent that dries quickly to give high bond strength Bond It CONTRACTORS PVA can be used with plaster, cement, timber, gypsum wall boards and paper. Properties as an adhesive include fast drying. It is also a readily dilutable primer for sealing applications or addition to cement and plaster to improve adhesion and cure. Application ; As a primer: Suitable as a primer for renderings, for bonding new plaster to old plaster, on porous brick, stone, floor tiles and new plasterboard. Dilute 1 part CG PVA with 2 parts water and mix well. Apply using a brush, working material well into crevices and gaps. Allow coat to dry before continuing. For use as a key coat for new plaster, concrete repairs, cement screeds and renders. Prime as above then brush apply second coat of CG PVA undiluted and apply topping whilst CG PVA A is still tacky. As a key coat for ceramic tiles and painted surfaces, first ensure that the surfaces will withstand loading on new plaster. Apply Bond IT CG PVA undiluted and trowel on plaster whilst still tacky. An alternative for these surfaces is to use Bond It PreGrit or to mix 1 part CG PVA with 1 part water and use to slurry a blend of 1 part Portland cement to 2 parts clean sharp sand and apply with a notched trowel. Allow to dry for a minimum of 24 hours and then apply a top coat of plaster or cement. Key Coat for porous and rough surfaces, bonding paving, terrazzo, quarry, slate and floor tiles. Prime the floor and back of the tiles as specified under priming. Mix 4 parts CG PVA with 1 part water and coat floor and tile backs. While still tacky apply sand and cement slurry to the floor and bed in the tiles. The bedding should be of a minimum 3mm. Cement Admixture: Prime as above then mix 1 part CG PVA :1 part gauging water and add to cement in place of the gauging water. See Bond-It Website forTDS / SDS