Description
How to installation: 1. Fix the Aluminium profile into the Connector 2. Take off the strip’s 3M tape,paste led strip aluminium groove 3. Insert silicon lamp cover into aluminium groove and fasten it 4. Insert end-cap 5. Insert LED Terminal wire into the groove 6. Tighten the lamp under Clockwise direction 7. Insert the square tube into the base,tighten screw with a wrench 8. Connect the terminal of the Lamp with controller 9. Connect adaptor with controller 10. Power-on test Packge Included: 1 ✖ 1 Set of Floor Lamp Product Parameters: Model: CL-FW03 Size: Ø30*1562mm Power: 18W Working voltage: DC 12V LED Type: 5050RGB LED QTY: 90PCS Color: RGBW Shell Material: Aluminum alloy+ABS+Silicone Storage Temperature: -20℃ ~ +45℃ Working Temperature: -20℃ ~ +40℃ Warnings 1. Avoid installing above heat-sourced objects, areas with significant changes in sunlight, airflow, and temperature. 2. Do not look directly at LED lights with your eyes for long periods of time, as this may cause eye discomfort or damage to your eyes. 3. Avoid exposing appliance to outdoors and directly raining, and do not immerse appliance in water, as this may be short-circuited or damaged. 4. Do not use sharp objects or brown contaminants to collide with the lamp to avoid affecting function and appearance.