Description
Specifications: Rated Voltage: 20 to 50 VDC Rated Current: 10A-15A Max. Speed: 20000RPM( the specific speed depends on the motor itself and load) Storage temperature: -20~+65 Usage environment: Avoid direct contact with dust, fumes & corrosive gases Size: 9.5 * 7 * 3.5cm / 3.74 * 2.76 * 1.38inch Weight: 260g Detail: 1 regulation modes(can not be used simultaneously) Through external potentiometer & 10VDC voltageto speed regulation; 2. Alarm output ALM signal: An 5V alarm pulse output between the port & the ground. 3. Positive inversion function: F/R:Fiddle the toggle switch on the corresponding side, the motor steering direction can be changed. For the toggle switch, the white part is up and down, then twang it up and down. For the toggle switch, the white part is horizontal, and the twang horizontally. 4. Start-stop (two control modes): External switch EN to transfer, Side toggle switch EN: for the toggle switch, the white part is up and down, down for the start; for the toggle switch, the white part is horizontal, then dial to start Note: only one control at the same time. 5. Locked-rotor protection: Switch on the power again to start if stop 6. Green light: power on and off 7. Red light: two flashes in standby time, after starting, extinguish. Package included: 1 x Motor Driver Controller with cable