Description
Titan Topcoat with superior robust protection is a quick drying, water-based, low odour, non-yellowing satin finish. It is a multipurpose, tough but flexible, heat resistant, stain resilient and biocide free waterproof coating. It can be applied to most types of wood and sheet materials, such as plywood and MDF. In addition, it will bond to many other surfaces including masonry, concrete, terracotta, metal and laminates. It is perfect for surfaces that need to be waterproofed and hygienic such as bathroom and kitchen floors, cafes and bars, laminate floors and outdoor furniture – bonds to most surfaces! Titan Topcoat can be diluted with cold water for a variety of purposes including spray application or to create a thinner basecoat sealer before applying further coats. Further dilution will produce an excellent primer for new plasterwork prior to painting. If you are applying this coating over our wood dyes, it should be possible to both dye the wood and apply two full coats to your project within the day, after an early start. We recommend not to use this with our Superior Finishing Oils. How to use PREPARATION: Careful, thorough preparation will result in a far superior finish, especially when applied over Littlefair’s Water Based Wood Dye. (Please refer to the instructions on the dye). If you are dying the wood first, the final appearance will be a combination of the wood’s natural colour, the dye and the topcoat. It is always a good idea to prepare a test piece in exactly the same manner as your project. APPLICATION: Titan Topcoat can be applied with a good quality brush, roller or applicator pad. Aim to work quickly and confidently and try to avoid overlapping. When applying to larger surfaces such as doors, floors and tabletops it helps to dilute the first coat with about 20% cold water and brush out a thin film as a basecoat.