Description
Silver Conductive Epoxy Adhesive 8331D is an electrically conductive, silver-filled 2-part epoxy adhesive. It is smooth, non-sagging, thixotropic, and bonds well to a wide variety of substrates product allows for quick, cold-soldering repairs. It can also be used as a solder replacement for bonding heat-sensitive electronic components, or for making conductive connections where soldering is not an option,such as when bonding to glass, soft metals, or plastics.8331D has been formulated to be economical. For a higher fill that maximizes conductivity, use 8330D. For a longer working time, time, use 8331S. Application InstructionsRead the product SDS and Application Guide formore detailed instructions before using this product(downloadable from MG Chemicals)mmended PreparationClean the substrate with Isopropyl Alcohol, MG #824,so the surface is free of oils, dust, and other residuesnge1. Twist and remove the cap from the syringe not discard cap.2. Measure 1 part by volume of A.3. Measure 1 part by volume of B.4. Dispense material on a mixing surface or container,and thoroughly mix parts A and B together.5. To stop the flow, pull back on the plunger.6. Clean nozzle to prevent contamination andmaterial buildup.7. Replace the cap on the syringe InstructionsAllow to cure at room temperature for 6 hours,or cure the adhesive in an oven at one of thesetime/temperature options:• 10 min @ 65 ˚C• 5 min @ 80 ˚CStorage and HandlingStore between 16 and 27 ˚C in a dry area, away fromsunlight (see SDS). To maximize shelf life, recapproduct firmly when not in use.