Description
Instructions: Nice Flo Remote: Simple to set up, open the new remote and place the tabs like the original remote. Nice SMILO and FLO-R remote control: can be configured in 2 different ways, one using a remote control that is already in the installation and another by pressing the button of the receiver. HIGH FROM OTHER HANDLE: Step 1. Press for five seconds the button on the new remote that you want to activate and release. Step 2. Press slowly three times the same button on the old remote that already works (the door should not be opened; if it opens it is that in step 1 we have been more or less than 5 seconds, repeat with exact 5 seconds) Step 3. Slow press the button on the new remote and release. the controller is already disputed. HIGH FROM RECEPTOR: Step 1. We locate the receiver and press the receiver button for three seconds. Step 2. When the light turns on, release the button. Step 3. Press the button to open the new remote that you want to leave high on the receiver. If you want to make more than one remote, simply press the button on each of the controllers, one below another. Note: The remote control NICE FLOR-S has the installation protected by the installer and other original remote may not work. CONSULT YOUR INSTALLER TO CONFIRM COMPATIBILITY