Description
– Crystal-clear and healthy water- Lowering of nitrite and ammonia load- Increase of redox potential and oxygen content- Reduction of the germ load in water- Fewer diseases in pond & aquarium- Less expensive chemicals and cures- Accelerated dismantling of yellow materials and other pollutants/organic subjectsThe compact equipment integrates ozonisator and ventilation pump. Over a flexible hose the ozone reactor is attached for water aeration. With an input wattage of only 12W the equipment produces sufficiently ozone for the durable conditioning of up to 15.000 litres fresh water or 3000 litres of sea waters for (dependent on the fish trimming). For control of the ozonizer we recommend our redox measuring device ORP-169A (RE1) with manual control and redox controller PH-203 (P11) with fully automatic control in our shop redox tension a measuring method for the water qualityThe redox tension is indicated in mV and describes the oxidizing or reducing character of a medium out. In principle the more highly the redox value applies, the more unloaded is the water. The continuous reduction of the redox value indicates, that an unwanted biological process runs off e.g. dead fishming poolWithin the swimming pool range one uses the redox measurement for the determination of the sterilization ability of the water. For example the time the swimming pool water needs to kill e-koli-bacteria depends on the redox value, which means of the operational readiness level from free chlorine. The necessary value is with approx. 700 mVsal: http://www-messgeraet/JOM/index/suche?searchword=oza&ordering=newest&searchphrase=all&limit=30
The offered article is not a toy in the meaning of the toy guideline (2009/48/EG appendix I, 2C + D) and is exclusively intended for persons in the age of at least 14 years.