Description
Cat5e Faceplate The rhinocables faceplate module kit that comes supplied with modules, faceplate and spacers/blanks where needed. It utilises wall space by making a convenient 1/2/4 port Cat5E network socket in the position of your choosing. Cat6 Faceplate The rhinocables faceplate module kit that comes supplied with modules, faceplate and spacers/blanks where needed. It utilises wall space by making a convenient 1/2/4 port Cat6 network socket in the position of your choosing. Cat6a Shielded Faceplate – Tool-less rhinocables faceplate pre-assembled with Cat6a pass-through shielded clip in euro modules (50 x 25mm). rhinocables Cat6a modules are the toolless type and colour coded making installation of cables easier. These faceplates come with screws and cable ties to hold the module firmly around the cable. The module can fit cables with a variety of diameters due to an adjustable cable clamp. The faceplate is designed for 86mm x 86mm back boxes and are available with one or two Cat6a modules. Please note: Not compatible with deep back boxes but will work with 45mm back boxes if the cable uses rear cutout. 32mm Deep Single Back Box The rhinocables back box is a surface mounting single back box for 86mm wide faceplates. Has multi in and out points allowing easy access, 32mm deep to allow enough cable bend for most applications. 32mm Deep Double Back Box The rhinocables back box is a surface mounting double back box for 145mm wide faceplates. Has multi in and out points allowing easy access, 32mm deep to allow enough cable bend for most applications.
