Description
Specification: Voltage: Input DC3.6-6V, output DC400kV – 600KV( Please note that when security ) High Type: Pulse Current High voltage bipolar discharge distance: 10mm-20mm Output voltage lines Length: about 100mm Input power cable length: about 10mm (red is positive) Dimensions: Φ24 * 63mm
About Power: 3.7V Li-ion battery can be used single or two series, such as 18650 , idle cell phone batteries ( to remove the for protection board , the proposed capacity of 2000mAh or more ) or NiCd / NiMH battery pack , 4V or 6V Lead Acid batteries. This module is a small production with high-pressure science inverter transformer / booster finished module , the input terminal DC3V-7.2V voltage can get 200,000 volts for DC high voltage ( about 1-2cm arc ) at the output can be used as high school science experiments , electronic equipment, negative ion generator, high voltage source to use when making small science .
Note: Avoid high-pressure high-voltage module load electricity use. Must adjust the high voltage side suitable distance ( before electricity, battery voltage and capacity is proportional to the distance from high-voltage arcing used when testing the arc distance from short to long experiment , prohibited from beyond the arc when powered up , the energy can’t be released due to high pressure , easily damage the module. ) Due to power, the internal heat is not easy, every power-on time should be controlled within a minute.
Package included: 1x 3v-6v to 400kV Boost Step-up Power Module
