Description
Sika AnchorFix -1 – Styrene and solvent-free 2-component polyester based anchor adhesive. Areas of application: as a fast-hardening anchor adhesive for high-quality bonding of all sizes of – reinforcement iron – threaded steel – bolts and various other anchor systems – concrete – masonry (perforated and solid stone). The suitability of the Sika AnchorFix adhesive in terms of desired adhesion strength as well as the yellowing of unprotected adhesive surface is prevented. cut on a pattern surface. The variety of possible substrates make anchor tear tests essential for the following substrates: hard natural stone, uncracked rock. Product features: quick curing, application with standard cartridge gun, can also be used at low temperatures, high resilience, stable even overhead, styrene free, low odour, small amount of waste (cartridge recyclable). Chemical. E basbasbas: polyester Processing methods/tools: Preparation of the cartridges screw on the cartridge and remove the lid. Cut the sealing film with a knife and remove the cap. Press the cartridge briefly until the two openings each white and black material escapes. Do not use this material. Screw on static mixer. Insert cartridge into application gun and start application. If the work is interrupted, the static mixer can remain on the cartridge as long as the hand pressure gun is relaxed. If the resin in the static mixer begins to harden, it must be replaced. For optimal workmanship, we recommend the use of a high-quality hand pressure gun. All information is subject to technical and logic adjustments. The latest product data sheet (PDB).